Issues Fixed in ILOM 2.0.3.3
The following issues have been fixed in ILOM 2.0.3.3:
"The stop /CH Command Lights the Chassis Alert LED (6678328)" on page 31
■
"SNMP Trap Destination Port Should Be Configurable (6654887)" on page 31
■
The stop /CH Command Lights the Chassis Alert LED
(6678328)
When using the stop /CH command, the chassis Power/OK LED goes into standby
state, and the chassis alert LED is also lights. This will only happen if the stop /CH
command is successful. If the graceful shutdown does not occur, the alert LED will
not light.
SNMP Trap Destination Port Should Be Configurable
(6654887)
It should be possible to specify, per alert rule, what the destination port of the trap
should be. Currently it is hard coded.
30
Sun Blade 6048 Modular System Product Notes • April 2011