Outdoor GreatRoom Company The Cove Installation Instructions Manual

Outdoor GreatRoom Company The Cove Installation Instructions Manual

Fire pit
Hide thumbs Also See for The Cove:

Advertisement

Quick Links

The Cove Fire Pit
Installation Instructions for CV-1242

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the The Cove and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Outdoor GreatRoom Company The Cove

  • Page 1 The Cove Fire Pit Installation Instructions for CV-1242...
  • Page 2 IMPORTANT Please consult your Crystal Fire instruction manual for detailed instructions and important information related to the burner installation including: lighting and operating instructions, safety information, and proper tightening of connections with two wrenches. DO NOT ATTEMPT TO INSTALL CF-1242 BURNER WITHOUT FIRST CONSULTING THE CRYSTAL FIRE OWNER’S MANUAL.
  • Page 3 Included With Your Fire Pit CV-1242-BASE with Control Panel Burner Riser (P/N: 10298) CFP1242 Crystal Fire Burner Kit...
  • Page 4 Assembly Instructions 1. Remove Cove-1242-Base from Packaging crate  Four People are required to lift base out of packaging and place into final location. 2. Sparker Box Installation  Remove sparker cap and hex nut. Insert AAA battery (not included) with + end out. ...
  • Page 5 3. Gas Connections  See Crystal Fire Plus instructions for burner installation. All gas connections were completed at the factory.  Check all connections for leaks. If needed, tighten connection with 2 wrenches and re-check for leaks.  Attach burner valve to control panel with provided screws as shown below.
  • Page 6 5. Connect Ground wire and Electrode wire from burner to sparker box.  Plug both BLACK wires hanging from the burner into the back of the sparker box. If an orange wire is present, do not use it. The orange wire is for automatic ignition system add-on only.
  • Page 7 7. Install Fire Media  Scatter all included glass beads, lava rock, or other approved fire media evenly across entire burner surface. DO NOT OPERATE CRYSTAL FIRE PLUS BURNER WITHOUT INCLUDED GLASS BEADS OR OTHER APPROVED FIRE MEDIA IMPORTANT Please consult your Crystal Fire instruction manual for detailed instructions and important information related to the burner installation including: lighting and operating instructions, safety information, and proper tightening of connections with two wrenches.
  • Page 8 Please visit https://www.outdoorrooms.com/product-registration to register your product. Thank you for purchasing an Outdoor GreatRoom Company product! This fire pit was made with pride in the USA. 14400 Southcross Drive West • Suite 100 • Burnsville, MN 55306 Toll Free: 1-866-303-4028 •...

This manual is also suitable for:

Cv-1242

Table of Contents