Accessory Packages; Multiple Hanging & Draft Inducer Positions - Space-Ray LTU 160/100-N7 Installation And Operation Instructions Manual

12.0)

ACCESSORY PACKAGES

A. Elbow Accessory Package, Part #43208010
(Option for LTS Series Only)
Contains:
Elbow, #43175000......QTY–1
#10-16 x ½ Self-Drilling Screws, #02189020......QTY–2
Tube Coupling, #30462980......QTY–1
B. Corner Reflector Accessory Package, Part #43342000
(Option for LTS Series Only)
Contains:
Corner Reflector Assembly, #43345000......QTY–1
Speed Clips, #02266010......QTY–4
C. Exhaust Hood Package, Part #42924000
Contains:
Exhaust Hood Assembly, #42925540......QTY–1
#8-18 x ½ Self-Drilling Screws, #02189030......QTY–2
D. Kit, 2-Stage Relay Board, Part #44195000
Contains:
Relay Board , #30709058......QTY–1
Enclosure, #30709059......QTY–1
Cord Connector – ½" , #30635040......QTY–2
13.0) MULTIPLE HANGING & DRAFT INDUCER POSITIONS
The heater can be mounted horizontally or at an angle of 45º maximum from horizontal. Make sure the long axis
of heater is level.
Multiple draft inducer positions can also be used as shown in the diagrams. This allows for the desired
configuration of flue venting. Regardless of the position chosen, the junction box must remain horizontal as
shown. This may be achieved as follows:
1. Remove the three (3) ¼-20 locknuts securing the motor and blower wheel assembly.
-32-
Form #43155010
Dec 2017