8.3)
LTU 180-250 SERIES HEATER ASSEMBLY OVERVIEW
8.4)
LTU SERIES 15' BODY PACKAGE OPENING
Follow the procedure below to open the 15' body package.
1. Remove end reflectors from packaging.
2. Lift the tube at the flange end, then slide tube support/hanger bracket between marks on tubes and tighten
the "U" bolt hex nuts. Follow instructions in Sections 8.5) and 8.6) for the field assembly of the heater.
Models: LTU 180-200
Models: LTU 225-250
-12-
Form #43155010
Dec 2017