Adjusting the Tear-off Position
If the paper's perforation does not meet the tear-off edge, you can
adjust the tear-off position using the micro-adjustment feature.
1. Make sure the printer feeds the paper to the tear-off position
after printing the document. The TEAR OFF light should be on
and the MULTI-PART light should begin blinking, indicating that
you can now use the micro-adjustment feature to make fine
adjustments to the tear-off position.
2. To make fine adjustments to the tear-off position, press the
FORM FEED button to feed the paper backward or the LINE FEED
button to feed it forward.
You can now tear off your document from the perforation and
resume printing. The printer remembers this new tear-off position
even after the printer is turned off and on again.
3-20
Using the Printer