TEAR OFF
Press this button to feed the perforation of continuous paper to the
tear-off edge of the printer. After tearing off the paper, press this
button again to feed the paper backward to the loading position.
SelecType
FONT
Press this button to select LQ ROMAN, LQ SANS SERIF, DRAFT mode,
or a cartridge font (if installed). The indicator light shows the font
you select. See Selecting Typestyles later in this chapter.
PITCH
Press this button to select the character spacing. You can choose
10 CPI, 12 CPI, 15 CPI, 17 CPI, 20 CPI, or PROPORTIONAL spacing. The
orange indicator light shows the spacing you select. You cannot
select proportional spacing with draft mode. (Draft mode overrides
proportional spacing.)
3-4
Using the Printer