Options - Epson LQ-860 User Manual

Options

Problem
Using the cut sheet
feeder, the paper
does not feed
properly.
The LOAD/EJECT
button is pressed, but
the platen does not
move and the paper
does not feed.
After a print command
is sent from the
computer, the platen
does not move and the
paper does not feed.
Solution
You may be pressing the LOAD/EJECT
button while the printer is on line.
Always take the printer off line before
feeding the paper. Paper feeds
automatically when the cut sheet feeder
receives a print command from the
computer (only while the printer is on
line).
The printer may be off line. Press the
ON LINE button to put the printer on line.
The cut sheet feeder mode may be off.
Set DIP switch l-7 to on. To use control
codes instead, use ESC EM 4 to set the cut
sheet feeder mode. The printer must be
ready with no paper out condition to
receive this command. Send the
command with continuous paper loaded
and with the paper select lever in the
continuous position (all the way back).
Troubleshooting
7-27