Using Continuous Paper - Epson LQ-860 User Manual

Using Continuous Paper

The printer allows you to easily switch between the cut sheet feeder
and the tractor feeding system without having to remove either the
feeder or the continuous paper supply.
1. Make sure the continuous paper is already loaded and in the
standby position as explained in Chapter 2.
Install the cut sheet feeder as described in this section, making
2.
sure that DIP switch l-7 is set to on.
If a single sheet is still in the printer, eject it by pressing the
3.
LOAD/EJECT button.
To switch from the cut sheet feeder to continuous paper, pull the
4.
paper release lever forward to the push tractor mode position
(the middle position). You do not need to change the setting of
DIP switch l-7.
CAUTION:
sure that the paper release lever is always in the push
tractor position.
Using the Printer Options
5-16
When using the built-in push tractor only, be