Epson LQ-860 User Manual page 231

Problem
Using the cut sheet
feeder, the paper
does not feed
properly
(continued).
One page printing
of
has spread to two
pages.
When printing
envelopes, the
either do not
envelopes
or feed incorrectly.
feed
Using the pull
tractor with the
push tractor,
continuous paper
does not feed
properly.
When the FORM FEED
or LINE FEED button is
pressed, the paper does
not feed at all. Platen
does not rotate.)
Solution
The page length setting may be wrong.
Run a self test in cut sheet feeder mode.
The printer will automatically measure
the paper loaded and set the correct page
length. See Chapter 5.
You may have to change the top or
bottom margin or page length for your
application program.
The two front levers may not be set to
envelope feeding. Push down on the two
front levers until they lock into position.
See Chapter 5.
The printer may be on line. Before using
the control panel buttons to feed paper,
always take the printer off line (ON LINE
light is out).
Troubleshooting
7-31