Character Tables - Epson LQ-860 User Manual

Character Tables

ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects the character table used by codes 128 to 255. Selecting
Epson Extended Graphics characters does not disable italic
printing. Italic printing can still be selected by ESC 4. The
following values can be used for
0: Selects italics character table.
1: Selects Epson Extended Graphics character table.
2: Selects user-defined character table and remaps user-defined
O-127 to 128-255.
Note that the value of
the Appendix for character tables.
ESC 4
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Causes characters from the italic character table to be printed.
This command is valid even if the Epson Extended Graphics
character set has been selected by ESC t or by DIP switches, but
the character graphics are not italicized.
9-36 Command Summary
ESC t
n
27
116
1B 74
n:
must equal 00 hex, 01 hex, or 02 hex. See
n
ESC 4
27 52
1B 34
Select Character Table
n
n
Select Italic Mode