3. If the power cord is not attached to the printer, plug the
appropriate end into the AC inlet on the back of the printer.
4. Plug the power cord into a properly grounded electrical
outlet.
Connecting the Printer to Your Computer
Your printer has a standard IEEE-1284 compatible parallel
interface connection and an optional interface.
If your computer requires a different type of printer interface, try
one of the Type B optional interfaces described in "Optional
interface cards" on page A-19.
Follow the steps below to connect the printer to your computer
using a parallel interface connector, or a ground wire connector.
1. Make sure both the printer and computer are turned off.
2. Plug the cable connector securely into the parallel interface
connector.
.
1-6
Setting Up the Printer