Fujitsu ScanSnap ix500 Wi-Fi Connection Manual page 32

Disconnect the USB cable from the ScanSnap.
The ScanSnap Manager icon in the notification area located at the far right of the task bar changes
to .
HINT
l Using ScanSnap Wireless Setup Tool allows you to set up a wireless network at any time to
connect the ScanSnap to a wireless LAN. When you install ScanSnap Manager, ScanSnap
Wireless Setup Tool is installed at the same time.
Start ScanSnap Wireless Setup Tool in the following procedure:
1. Connect the ScanSnap and the computer with a USB cable.
2. Open the ADF paper chute (cover) of the ScanSnap to turn the power on, and then turn on the
Wi-Fi switch on the back of the ScanSnap.
3. Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Wireless Setup
Tool] (for Windows 8.1/Windows 8, select [ScanSnap Manager] → [ScanSnap Wireless Setup
Tool] on the All apps screen).
The ScanSnap Wireless Setup Tool will start running.
4. Click the [Wireless Network Setup Wizard] button in the main menu.
The Wireless Network Setup Wizard appears.
l It may take a while for Wireless Setup Tool to start running. If ScanSnap Wireless Setup Tool does
not start even after you wait for a while, restart the computer and then start ScanSnap Wireless
Setup Tool again.
32
Network Connection