Haier HWM105-M186 Owner's Manual page 8

Installation and adjustment
Change the direction of the drain hoses
On model HWM105-M186
Figure 1 shows the factory installation position of the
drain hose.
Extend the drain hose from the spin tub side:
1.Remove the drain hose from the hanging hole on
the cabinet.Pull the drain hose fixing hook outwards
gently to take out the drain hose from the two fixing
hooks.(See Figure 2)
2.Turn 90° the drain hose fixing hookto remove it from
the installation hole.(See Figure 3)
3.Install the two drain hose fixing hooks taken out,into
the installation hole at the other side of the base
frame (to aim at the installation hole accurately you
can lean the washing machine forward slightly).
Then turn 90°.(See Figure 4)
On models HWM130-M186,HWM150-M186
The drain hoses in the wash tub when out off factory,brfore use the machine,please
screw the drain hose on the drain valve parts,make sure the drain hose fixing as
necessary.
Drain valve parts
1.Remove the cover
drain hose fixing hook
Side Section View
drain hose
fixing hook
slightly
pull out
take off the fixing
hook downwards
2.Install the drain hose
6
Figure 1
fixing hook
installation hole
drain hose
Figure 2
take off drain hose
turn 90° the
fixing hook
Figure 3
turn 90° the
hook to fix it
Figure 4
insert the fixing hook into
the installation hole upwards