Haier HWM105-M186 Owner's Manual page 17

Disposal after washing
Cleaning the overflow filter
On Model HWM105-M186
Too much lint in the overflow filter will influence normal usage of the machine.
Remember to clean it once every two months.
1.Take off the overflow filter.
Nip the elastic fixing claw and pull in the
direction of the arrow to remove (as
demonstrated in the figure to the right).
2.Clean the overflow filter.
Clean the lint around the filter and flush
with tap water.
3.Re-install the overflow filter.
a.Install the corrugation pipe.
b.Attach the mounting plate at the bottom
of the filter into the valve cover.
c.Hang the hook on the left upper side.
d.Push in the upper part.
15
Elastic fixing claw
Water level
selection lever
Corrugated
hose
Hook