Haier HWM105-M186 Owner's Manual page 14

Washing sequence
The rinse cycle
Rinse with water-filling
1.Place laundry into the washing machine.
Place laundry into the washing machine. Select the appropriate current according
to the laundries.
2.Add water.
Add the appropriate amount of water.
3.Rinse.
Adjust the wash timer to 5-7 minutes for the rinse cycle.
Rinsing with stored water
(Repeat the mid-wash spin cycle and rinse cycle with stored water 2-3 times)
1.Place laundry into the washing machine. Select the appropriate current
according to the laundries.
2.Fill up water to the preset level.
3.Rinse.
Adjust the wash timer to 2-3 minutes for rinsing.
When the laundry quantity is low, use the "SOFT" current. If you use the
"STANDARD" current, the water may splash.
Spinning
1.Distribute laundry into the spin tub evenly and smoothly.
2.Insert the gland into the tub properly.
Close the inner and outer covers of the spin tub.
3.Spin.
Select an appropriate spin time according to the condition of the laundry, and start
the spinning cycle.
During the spinning cycle, if any abnormal sound occurs, it is generally due to the
laundry being placed in a slanted fashion.Please stop the machine and re-arrange
the laundry accordingly.
During the spinning cycle, the machine will pause if the outer cover of the spin tub
is opened. Close it to resume the spinning cycle.
To run spinning and draining or rinsing with water-filling
one after the other, first run the spinning cycle for around
1 minute, then draining or rinsing with water-filling.
Otherwise the spinning will stop automatically because
of the excess water in the spin tub.
12