Haier HWM105-M186 Owner's Manual page 9

Installation and adjustment
Install the washer legs
Only on models HWM130-M186,HWM150-M186
1.Carefully tilt the washing machine to the back and install the bottom legs at the
front of the base.Make sure that the legs are installed in place.(Figure 1).
2.Carefully tilt the washing machine to front and install the bottom legs at the back
of the base.Make sure that legs are installed in place.(Figure 2)
Install the water intake hose
Insert the water intake hose into the
water-inlet entrance on the control panel.
Add water as necessary.
Bottom legs
Figure 1
Bottom legs
Figure 2
7
Water intake hose
Water inlet