Table of Contents
Advertisement
Changing the fuse
Changing the bulb
2
3
Function check
1
Leica M620 / Ref. 10 714 371 / Version -
Warning 13
Risk of death from electrical shock!
➩Before replacing the fuse, unplug the power cable
from the power socket.
➩The fuses are located in a fuse holder (1) in the instrument
power socket.
➩Use a screwdriver to push the fuse holder out before
removing it completely by hand.
➩Change the fuses.
➩Reinsert the fuse holder and press it fully home by hand.
Caution 14
Risk of burns!
The lamp and its mount get very hot.
➩ Check that the lamp and mount has cooled before you
remove the lamp.
Replace defective lamps immediately after an opera-
tion to ensure that a replacement lamp is available at
all times.
Use only genuine Leica replacement lamps.
➩ Open lamp replacement cover (2).
➩ Pull the halogen lamp and base (3) out of its holder.
➩ Insert the halogen lamp and base into the holder until it
clicks into place.
➩ Close lamp replacement cover (2).
Lamps
➩ Switch on the power switch.
Main lighting is lit.
➩ Switch to the auxiliary lighting.
The auxiliary lamp will light up.
➩ Switch back to the main lighting.
Footswitch
➩ Position the footswitch.
➩ Test all the functions with the footswitch.
Care and maintenance
41
Advertisement
Table of Contents
