Sharing An Epl-N2000 Among Several Workstations - Epson EPL-N2000 Network Administrator's Manual

If several ports are redirected, REMSTAT returns a message
similar to the following:
ITC Remote Print Servers active for PUBSPRT—Printer
Busy
ITC Remote Print Servers active for EPLASER—Printer
Ready

Sharing an EPL-N2000 Among Several Workstations

To set up two or more IBM LANServer workstations running
Warp Connect to share an EPL-N2000, you use piping to
configure a unique port name for each workstation instead of
each printer.
Follow these steps:
1. Complete the steps in "Copying the Piping Software."
2. From your workstation's remote print service directory, use
the ADDPORT command to configure a port for the first
workstation.
Note:
Choose a name that you can use to begin a sequence.. For example,
the entry you make for the first workstation might be the following:
ADDPORT PORTA
3. Repeat step 2 for any additional workstations.
6-10 Configuring the EPL-N2000 for OS/2