Setting Up Redirection To The Epl-N2000 - Epson EPL-N2000 Network Administrator's Manual

Setting Up Redirection to the EPL-N2000

To redirect your workstation's ports to one or more EPL-N2000
printers, copy the EPL-N2000 redirection software to your root
directory. Then edit STARTUP.CMD to include the RPRINT
command.
Follow these steps:
1. If you're unsure of the serial number for the EPL-N2000,
print a network adapter status sheet. See Chapter 1 for
details.
2. Insert the diskette labeled EPSON Net! for NetWare DOS
and OS/2 in your workstation's diskette drive.
3. Open an OS/2 full screen command session.
4. Open the OS/2 directory on drive A (or B) and go to the
REDIRECT directory for your network protocol.
If your network protocol is TCP/IP, type CD
TCPIP\REDIRECT and press the Enter key.
If your network protocol is NetBEUI, type CD
NETBEUI\REDIRECT and press the Enter key.
5. Copy the redirection files appropriate to your protocol to the
root directory of your OS/2 workstation.
If your protocol is TCP/IP, copy RPRINT.EXE and
RSTAT.EXE.
If your protocol is NetBEUI, copy RPRINT3.EXE and
RSTAT3.EXE.
6. Edit the STARTUP.CMD in your workstation's root
directory to include the RPRINT command appropriate to
your network protocol as the last line in the file.
Configuring the EPL-N2000 for OS/2 6-3