Epson EPL-N2000 Network Administrator's Manual page 77

Epson epl-n2000: network guide

Hide thumbs Also See for EPL-N2000:

Table of Contents

4. Create an initialization file in the remote print service

directory.

If your network protocol is TCP/IP, the format of the file

is as follows:

REMPRT <serial number> <portname>

If your network protocol is NetBEUI, the format is as

follows:

REMPRT3 <serial number>

Note:

The remote print service uses this file at startup to assign the printer

to the workstations' portnames. The file identifies the shared

EPL-N2000 printer by the serial number of its Ethernet card, and

each workstation by the portnames assigned in steps 2 and 3. For

example, if the printer's Ethernet card has the serial number

10900416, and the printer is shared by three workstations, the

initialization file might contain the following:

REMPRT 100900416 PORTA PORTB PORTC

5. Edit STARTUP.CMD in your workstation's root directory to

include the REMPRT command and the initialization file as

the last line.

If your network protocol is TCP/IP, type the following:

\EPNET\REMPRT @ REMPRT.INI

If your network protocol is NetBEUI, type the following:

\EPNET\REMPRT @ REMPRT3.INI

Configuring the EPL-N2000 for OS/2 6-11

Table of Contents