Protocol Support - Epson EPL-N2000 Network Administrator's Manual

This chapter explains how to use EPSON Net! for OS/2 to set up
your Microsoft LANManager or IBM LANServer workstation to
send print files to the EPL-N2000 through either redirection or
piping. It also explains how to use piping to set up two or more
OS/2 workstations to share an EPL-N2000 printer.
Before you begin, do the following:
Make sure the EPL-N2000 is connected to the network and
turned on. See Chapter 1 for information on connecting the
Ethernet interface card.
Make sure you have supervisor privileges for the OS/2
workstation on which you set up redirection or piping.

Protocol Support

The EPL-N2000 supports both NetBIOS over TCP/IP and
NetBEUI. EPSON Net! for OS/2 provides the following
programs for these protocols:
NETBEUI
RPRINT3, RSTAT3—LPT redirection
REMPRT3, REMBEU, REMDRV3, REMSTAT3—pipe support
TCP/IP
RPRINT, RSTAT—LPT redirection
REMPRT, REMDRV, REMSTAT—pipe support
Note:
OS/2 Warp Connect must be installed with TCP/IP, and OS/2 Warp
and Warp Connect must be installed with NetBEUI.
6-2 Configuring the EPL-N2000 for OS/2