Epson EPL-N2000 Network Administrator's Manual page 33

4. In the NetWare Config dialog box, make sure Remote
Printer is selected as the operating mode.
5. If you don't want to make other configuration changes, go to
step 8.
To make additional changes, select the print server that
services the EPL-N2000 in the Print Server name drop-down
list, or enter a new name.
6. To change the port number, enter the number for any
available port in the Port Number text box.
Note:
You can enter a setting from 0 to 15 for NetWare versions 3.x and
below. For NetWare 4.x and higher, available settings are from 0 to
254.
7. To enable hunting, click the On radio button in the Hunting
box. The default setting is Off.
8. Click Save to save your changes.
2-16 Configuring the EPL-N2000 for NetWare