Setting Up For Ibm Aix Systems (Rs/6000) - Epson EPL-N2000 Network Administrator's Manual

Setting Up for IBM AIX Systems (RS/6000)

AIX implemements the lpr function, which is set up using the
SMIT utility.
Follow these steps to set up the EPL-N2000 for IBM AIX
systems:
1. Complete the steps in "Setting Up the EPL-N2000 as a
Network Device" and "Setting Up the EPL-N2000 as a
Remote Printer" earlier in this chapter.
2. Invoke SMIT as the superuser and go to the Add Remote
Queue menu. To access the Add Remote Queue menu, select
menus and submenus in the following order:
Devices
Printer/Plotter
Manage Remote Printer Subsystem
Client Services
Remote Printer Queues
Add Remote Queue
3. When you see a screen requesting information similar to the
entries below, fill in the required data. For example:
Name of queue
Queuing discipline
serve
Activate the queue
Destination host
Pathname short filter
Pathname long filter
Name of queue for remote printer
4. Check the entry for your queue under Remote Printer Queue
devices. It will list the queue name and printer capabilities.
5. Use MANAGE LOCAL PRINTER SUBSYSTEM, AND
LOCAL PRINTER QUEUES to start the queue.
5-12 Configuring the EPL-N2000 for UNIX
EPSON
first come first
yes
200.200.200.99
C82331_PRT