Using Epson Zoner To Assign A Zone To Your Printer - Epson EPL-N2000 Network Administrator's Manual

8. Click Done to exit EPSON Namer.
If you should ever want to return the EPL-N2000 to its
default name, click Reset.

Using EPSON Zoner to Assign a Zone to Your Printer

Follow these steps to assign a zone to the EPL-N2000 on an
AppleTalk Phase II network:
1. Double-click on EPSON Zoner to start the utility. After
searching your network, EPSON Zoner displays the
following screen:
2. Select your printer name in the Printers list.
3. In the Zones list, select the zone that you want to assign to
your printer.
Note:
The default zone appears as an asterisk (*).
4. Set the AppleTalk PS option to Inactive.
5. Click Set.
Configuring the EPL-N2000 for AppleTalk 3-7