2. While holding the expansion tray vertically, insert the left leg
into the MP tray until the pin clicks into place in the hole on
the MP tray.
Installing the Face-Up Tray
Install the face-up tray onto the left side of the printer as follows:
1. Locate the output slot on the left side of the printer.
2. Squeeze the metal spring on the right side of the face-up tray
so that the end of the spring is folded down against the tray
as shown below.
8
Assembling the Printer
Need help?
Do you have a question about the ColorPage EPL-C8200 and is the answer not in the manual?