Check And Maintenance; Gear Box Oil; Lubricating All Grease Fittings - Kubota RCK72-F36 Operator's Manual

CHECK AND MAINTENANCE

To avoid personal injury:
A Stop the engine, set the parking brake, and
remove the key.
BGear box oil
1. To check the oil level, remove the check plug (bolt).
A Place the mower on a level surface.
Loosen the check plug. Oil should be visible
through the opening. If the oil level is too low, add
new oil to the check plug level.
(Use SAE 90 gear oil)
0.4 L (0.42 qts.)
(1) Drain plug (Bolt)
(2) Check plug (Bolt)
(3) Inlet (Bolt)
A Do not fill oil over the level to reach the check plug.
BLubricating All Grease Fittings
(Use multipurpose EP2 grease (NLGI Grade No. 2).)
Grease the following locations.
(1) Mower universal joint (A) Apply grease to the spline with
(2) Grease nipple
(1) Universal joint
(1) Front gauge wheel bracket
(2) Front gauge wheel
MAINTENANCE 17
the brush.