Check And Maintenance; Daily Check - Kubota GR1600EC Workshop Manual

GR1600EC, WSM

7. CHECK AND MAINTENANCE

A Be sure to check and service the machine on a flat place with engine shut off, the parking brake on and
chock the wheels.

[1] DAILY CHECK

To prevent trouble from occurring, it is important to know the condition of the machine. Check the following items
before starting.
Checking
A Check areas where previous trouble was experienced.
A Walk around the machine.
1. Tire pressure, wear and damage
2. Oil and water leak
3. Engine oil level
4. Transmission fluid level
5. Coolant level in the recovery tank
6. Damage of machine body, tightness of all bolts and nuts
7. Radiator screen
8. Panel screen
9. Brake play
10. Fuel level
11. Check air cleaner element
A Mower
1. Oil leak
2. Make sure blade cap screws are tight.
3. Blades for wear or damage.
4. Check all hardware.
5. Make sure all pins are in place.
6. Mower deck cleaning
7. Greasing
A While sitting in the operator's seat,
1. Speed control pedal and brake pedal
2. Brake
A Turning the key switch "ON"
1. Performance of the easy checker light.
A Starting the engine
1. Color of the exhaust fumes
2. Safety start switch, seat safety control and another safety devices.
3. Check for abnormal noise and vibration.
A Others
1. Check the areas where previous troubles were experienced.
G-13
GENERAL
0000001417E
0000009543E
KiSC issued 04, 2006 A