Table of Contents
Advertisement
1.3 System Features
The following table provides you with an overview of the main features of the 2029BT-Hxxx.
Motherboard (per node)
X11DPT-B; Chipset: Intel C621
Chassis
SC217BHQ+-R2K22BP2
CPU (per node)
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors (in Socket P (LGA 3647))
(Intel Xeon Processor Scalable Family). For the latest CPU/memory updates, refer to our website at
http://www.supermicro.com/products/motherboard/Xeon/C620/X11DPT-B.cfm.
Memory (per node)
Up to 6 TB of memory with DDR4 up to 2933 MT/s ECC Load Reduced DIMMs (LRDIMM) and Registered
DIMMs (RDIMM) in 24 DIMM slots; up to 256 GB; Support for Non-Volatile DIMM (NV-DIMM) and Intel Optane
DC Persistent Memory (DCPMM)
Expansion Slots (per node)
Two PCI-E 3.0 x16 (Low profile, 6.6" long); for HNC1R: One PCI-E 3.0 x16 (Low profile, 6.6" long)
Storage Drives
Twenty-four hot-swap 2.5" drives total; each node controls:
HTR: Six SATA drives
HNR: Six NVMe drives
HNTR: Four NVMe/SATA and two SATA drives
HNC0R: Four NVMe/SAS drives and two SAS drives (SAS3 support via Broadcom 3008)
HNC1R: Four NVMe/SAS drives and two SAS drives (SAS3 support via Broadcom 3108; hardware RAID)
Up to two M.2 SSDs, NVMe/SATA using optional carrier card AOC-SMG3-2H8M2-B, except:
HTR: M.2 SSDs not available
HNTR: One NVMe/SATA M.2 SSD standard
Power
Redundant 2200 W modules, 80Plus level Titanium
Networking (per node)
One SIOM slot (SIOM cards support Ethernet/IB/OPA with speeds ranging from 1G to 100G)
One dedicated LAN port for IPMI
Input/Output Ports (per node)
USB: Two USB 3.0 ports
VGA
Cooling
Four 8-cm mid-chassis fans; two CPU heatsinks per node; one air shroud per node
Dimensions
2U rackmount; (WxHxD) 17.6 x 3.5 x 28.8 in. (447 x 88 x 730 mm)
System Features
9
Chapter 1: Introduction
Advertisement
Table of Contents
