Removing The Hard Drive Tray And Installing A Hard Drive - Supermicro SuperServer 8028B-TR3F User Manual

SUPERSERVER 8028B-TR3F/C0R3FT User's Manual
6-7 Removing the Hard Drive Tray and Installing a Hard
Drive
To install a hard disk drive into the chassis, it is necessary to remove the HDD
carrier from the chassis.
Removing a Hard Drive Carrier
1. Press the release tab on the front of each hard drive try to unlock the HDD
carrier.
2. Using the handle, pull the HDD carrier out from the chassis as shown.
Figure 6-8: Removing a Hard Drive Carrier
Release Tab
6-8