Populating Memory Modules - Supermicro SuperServer 8028B-TR3F User Manual

Populating Memory Modules

Performance Mode (2:1) – RDIMM/LRDIMM ECC DDR3 In
Type
RDIMM
RDIMM
RDIMM
LRDIMM
LRDIMM (RM)
Note: For detailed information on memory support and updates, please refer to the
SMC Recommended Memory List posted on our website at
support/resources/mem.cfm.
RDIMM/LRDIMM DDR3 ECC in Lockstep Mode (1:1)
Type
RDIMM
RDIMM
RDIMM
LRDIMM
LRDIMM (RM)
Note: For detailed information on memory support and updates, please refer to the
SMC Recommended Memory List posted on our website at
support/resources/mem.cfm.
Notes:
•
SR=Single Rank, DR=Dual Rank and QR=Quad Rank
•
Command Address Timing is 1N for 1DPC and 2N for 2DPC.
•
For Memory Population Rules, please refer to the Platform Design Guide for
this chipset.
Performance Mode (2:1)
Ranks Memory
Per DIMM
DIMM Capacity
& Data (GB)
Width (See the Note
Below)
2Gb 4Gb
SRx4 4GB 8GB
DRx4 8GB 16GB
QRx4 16GB 32GB
QRx4 16GB 32GB
8Rx4 32GB 64GB
Ranks Memory
Per DIMM
DIMM Capacity
& Data (GB)
Width (See the Note
Below)
2Gb 4Gb
SRx4 4GB 8GB
DRx4 8GB 16GB
QRx4 16GB 32GB
QRx4 16GB 32GB
8Rx4 32GB 64GB
5-13
Chapter 5: Advanced Serverboard Setup
Max Speed (Ghz); Voltage (V)
Slots per Channel (SPC) and
DIMM per Channel (DPC)
2 Slots Per Channel
1DPC
1.5V 1.35V 1.5V
1333 1333 1333
1333 1333 1333
1066 1066 1066
1333 1333 1333
1066 NA 1066
http://www.supermicro.com/
Max Speed (Ghz); Voltage (V)
Slots per Channel (SPC) and
DIMM per Channel (DPC)
2 Slots Per Channel
1DPC
1.5V 1.35V 1.5V
1600 1333 1600
1600 1333 1600
1066 1066 1066
1600 1333 1600
1066 NA 1066
http://www.supermicro.com/
2DPC
1.35V
1333
1333
1066
1333
NA
2DPC
1.35V
1066
1066
1066
1333
NA