Table of Contents
Advertisement
Motherboard Connections
This section describes the connections on the motherboard and provides pinout definitions.
Note that depending on how the system is configured, not all connections are required. The
LEDs on the motherboard are also described here. A serverboard layout indicating component
locations may be found in Chapter 1.
Please review the Safety Precautions in Chapter 3 before installing or removing components.
Data Cables
The data cables in the system have been carefully routed to maintain airflow efficiency. If
you disconnect any of these cables, take care to re-route them as they were originally when
reconnecting them.
Important! Make sure the cables do not come into contact with the fans.
4.1 Power Connections
Two power connections on the X11SPW-TF must be connected to the power supply. The
wiring is included with the power supply.
•
24-pin Primary ATX Power (JPWR1)
•
8-pin Processor Power (JPWR2)
Important: To provide adequate power to the motherboard, connect the 24-pin and the 8-pin
power connectors to the power supply. Failure to do so may void the manufacturer's warranty
on your power supply and motherboard.
Chapter 4: Motherboard Connections
Chapter 4
45
Advertisement
Table of Contents
