Table of Contents
Advertisement
PSP Firmware Versions
This section displays the Platform Security Processor (PSP) firmware versions.
PSP Directory Level 1 (Fixed)
• PSP Recovery BL Ver
• SMU FW Version
• ABL Version
• APCB Version
• APOB Version
• APPB Version
PSP Directory Level 2 (Updateable)
• PSP Bootloader Version
• SMU FW Version
• ABL Version
• APCB Version
• APOB Version
• APPB Version
Trusted Computing
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
effect. The options are Disable and Enable.
TPM State
This software switch will enable or disable the installed security device. The options are
Disable and Enable.
Pending Operation
This feature wil schedule an operation for the the security device, select TPM Clear to clear
any pending operation. The options are None and TPM Clear
Device Select
Selecting TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 to TPM 2.0 devices and
Auto will auto-select according to the version of the device installed, with the default set to
TPM 2.0. The options are TPM 1.2, TPM 2.0 and Auto.
Chapter 6: BIOS (EPYC 7001 Series)
67
Advertisement
Table of Contents
