Table of Contents
Advertisement
Cleaning the Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year.
1.
Make sure that the printer is turned off. Then remove the
paper guide or, if it is installed, the cut-sheet feeder.
2.
Use a soft brush to carefully clear away all dust and dirt.
3.
If the outer case or paper guide is dirty or dusty, clean it with
a soft, clean cloth dampened with a mild detergent solution.
Keep the printer cover in place to prevent water from getting
inside the printer.
CAUTION:
•
Never use alcohols or thinners to clean the printer,
since these chemicals can damage the components as
well as the case.
•
Be careful not to get the printer mechanism or
electronic components wet.
•
Do not use a hard or abrasive brush.
•
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact
your dealer or a qualified service person if you think
lubrication is needed.
Maintenance
5-2
Advertisement
Chapters
Table of Contents
Troubleshooting
