Options - Epson ActionPrinter 2000 User Manual

Options

This section describes problems you may encounter while using an
option with your printer.
When you use the cut-sheet feeder, the paper does not feed
properly.
•
W h e n a p r i n t c o m m a n d i s s e n t f r o m t h e c o m p u t e r , t h e
platen rotates but paper does not feed.
Make sure DIP switch
switches in Chapter
The cut-sheet feeder may be incorrectly installed on the
printer.
See that the paper-release lever is pushed back to the
single-sheet position.
You may have loaded too many sheets in the cut-sheet
feeder's bin.
Paper may be jammed near the print head.
There may be only one sheet left in the bin. Add more
paper.
• Two or more sheets feed at one time.
You may have loaded too many sheets in the cut-sheet
feeder's bin.
You may have forgotten to fan the stack of paper before
loading it into the bin. Remove the paper and fan it.
Troubleshooting
6-10
1-8
is set on. See the section on DIP
3.