Epson ActionPrinter 2000 User Manual page 38

When printing on other types of paper, set the paper thickness
lever according to the table below.
Paper type
Ordinary paper (single sheet or continuous)
Thin paper
24 lb paper (single sheet)
Multi-part forms 2-sheet
Labels
Envelopes
Multi-part forms
With the pull-tractor installed, your printer can print
continuous multi-part forms of up to three parts (including the
original). Make sure you set the paper thickness lever to the proper
position using the table above.
Labels
When printing labels, always choose the type mounted on a
continuous backing sheet with sprocket holes for use with a
tractor.
CAUTION:
Never feed labels backward through the printer.
l
Labels can easily peel off the backing and jam the
printer.
Since labels are especially sensitive to temperature
l
and humidity, use them only under normal operating
conditions.
Do not leave labels loaded in the printer between
l
jobs; they curl around the platen and may jam when
you're resume printing.
3-sheet
Air mail
Plain
Bond (20 lb)
Bond (24 lb)
Printing on Special Paper
Lever position
2
2
3
2
3
4
4 or 5
6
6
7
on
Paper
Handling
2-11