Epson ActionPrinter 2000 User Manual page 94

The paper guide may be in the upright position. Make sure
that the paper guide is in the lowered position so that it
can act as a paper separator.
The paper may be creased. Make sure the leading edge of
the roll paper has a clean, straight edge.
The roll paper may not meet the specifications for your
printer. Be sure to use only paper sizes or weights that are
within the specified range.
With an optional interface, the printer does not operate properly.
The printer does not print or the printout is not what you
l
expected.
The interface board may be loose or not properly
connected. Check that the interface board is correctly
inserted into the connector on the main board.
You may not be using the correct interface. Check the
specifications to make sure that you can use the interface
with this printer.
You may not be using the correct cable. Make sure that the
cable matches the specifications of the interface.
The DIP switches or jumpers on the interface board may
not be set correctly.
The computer and interface settings may not match. Match
the settings for each condition.
Troubleshooting
Options
6 - 1 5