Setting Up Your Application Software - Epson ActionPrinter 2000 User Manual

Setting Up Your Application Software

Most application programs let you specify the type of printer you
are using so that the program can take full advantage of the
printer's features. Many of these programs provide an installation
or setup section that presents a list of printers.
Choosing from a menu
Because the family of Epson printers shares a great many
commands, you can use an application program even if it does not
list your printer on its printer selection menu. If your printer is not
listed, choose from the following list. (The printers are listed in the
order of preference.)
LX-810/850
LX-800
LX-86
LX-80
FX-850
FX-86e
EX-800
FX-85
FX-80+
FX-80
If none of these printers is listed, select the first one available on
the following list: LX, FX, EX, RX, MX, Epson printer, Standard
printer, Draft printer.
To use all of the features of the printer, however, it is best to
choose a program with one of the LX printers on its menu. If your
program does not list one of these printers, contact the software
manufacturer to see if an update is available.
1-14 Setting Up the
Printer