New Holland P2350 Service Manual page 47

Touching pins
Inspect the pins on the male connector. If a pin is bent
to the point where it is shorted to another pin within the
connector, replace the pin.
Recessed pin
Inspect the male connector for recessed pins, where the
pin is pushed back into the connector body, providing min-
imal contact when the two connectors are joined. If a pin
is recessed, push the pin into the connector body from the
back of the connector. Join and male and female connec-
tors and reinspect the pin. If the pin is recessed again,
replace the male connector.
INTRODUCTION
47827462 28/04/2017
42
4
RCIL06PTR104BAA
5
RCIL06PTR106BAA