Safety Signs - New Holland P2350 Service Manual

INTRODUCTION

Safety signs

The following safety signs are on your machine as a guide for your safety and for the safety of those working with you.
Walk around the machine and note the content and the location of all safety signs before you operate your machine.
Keep all safety signs clean and legible. Clean safety signs with a soft cloth, water, and gentle detergent.
NOTICE: Do not use solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may
damage or remove safety signs.
Replace all safety signs that are damaged, missing, painted over, or illegible. If a safety sign is on a part you or
your dealer replaces, make sure that you or your dealer install the safety sign on the new part. See your dealer for
replacement safety signs.
Safety signs that display the "Read operator's manual" symbol direct you to the operator's manual for further
information regarding maintenance, adjustments, or procedures for particular areas of the machine. When a safety
sign displays this symbol, consult the appropriate page of the operator's manual.
Safety signs that display the "Read service manual" symbol direct you to the service manual. If you doubt
your ability to perform service operations, contact your dealer.
NOTE: New decals are available from your NEW HOLLAND dealer.
1
SAIL15SE00440FA
Tow- behind air cart
47827462 28/04/2017
14