New Holland P2350 Service Manual page 36

Conveyor only
IMPORTANT
Belt alignment and belt tension should be checked
periodically.
Belt damage will occur if alignment or tension has
not been maintained.
Belt tension should be 31 N·m (23 lb ft) of torque on
adjustment bolts.
Belt should be tracked to be centered on the idle and
drive roller.
Part number : KS-1042
Quantity: 1
Conveyor tube (21).
Conveyor only
IMPORTANT
Belt alignment and belt tension should be checked
periodically.
Belt damage will occur if alignment or tension has
not been maintained.
Belt tension should be 5.6 N·m (50 lb in) on the
adjustment bolts, or until the center of the hopper
belt rises off the support beneath it.
Belt should be tracked to be centered on the idle and
drive roller.
Part number : KS-1042
Quantity: 1
Conveyor hopper (22).
INTRODUCTION
47827462 28/04/2017
31
14
KS-1042
15
SAIL15SE00428AA
16
KS-1042
17
SAIL15SE00431AA