11• Regular Maintenance Summary Table - Etesia PKCTM Original User Manual

11• REGULAR MAINTENANCE SUMMARY TABLE
ITEM
Oil
Air filter
Spark plug
Cooling system
Fuel tank and/or filter
Fuel hose
Drive clutch (PKCTM -
PHCT)
Blade
Cables
Screws
The best maintenance is regular cleaning after each mowing (cutting deck, wheels, engine, cutting heights, transmission system,...).
(*) Every 25 hours if the motor is used under tough conditions (dust, heat, heavy loads).
(**) These operations must be performed by an ETESIA-authorized dealer-repairer.
BEFORE EVERY EVERY 25
CUT HOURS
Check the level and
adjust
Check condition Clean
Check and clean
Check condition
EVERY 50
PERIODICALLY
HOURS
Oil change *
Replace the cart- Replace every 250 hours
ridge (PKCTM) (PHCT - PHCS)
Clean - adjust the Clean or adjust every 100
electrodes hours (PHCT - PHCS)
(PKCTM)
Check and clean (**)
Clean and check the cable
adjustment
Check condition
Check tightness
COMMENTS
Essential for the warranty
Check more often in very
dusty conditions
Replace if used too much
Check every 2 years, replace
if necessary (**)
Maintain perfectly clean
Replace after strong schock
21