Related Manuals for Etesia PRO51 X
Summary of Contents for Etesia PRO51 X
- Page 1 Original user Please read carefully before using your machine manual PRO51X PRO51D...
-
Page 2: Table Of Contents
OPERATING AND MAINTENANCE MANUAL FOR THE MOWER PRO51X - PRO51D SUMMARY Your safety and that of others ................................3 Description of graphical symbols................................. 5 Technical specifications ..................................7 Description ......................................8 Pictures ....................................... 10 Preparation and getting started ................................13 Operating instructions .................................. -
Page 3: Your Safety And That Of Others
• Before mowing, always clear the lawn of stones, pieces of wood or ETESIA has a policy of continuously improving the quality of its metal, wire, bones, plastic, branches and other debris liable to be products, therefore your lawnmower might show slight differences thrown out by the mower. - Page 4 Store the petrol in a clean container not used for other • Never attempt to adjust your mower without the prior approval of purposes. the manufacturer. • Any modification not authorised by ETESIA could render the machine WARNING: • fuel is highly flammable.
-
Page 5: Description Of Graphical Symbols
2• DESCRIPTION OF GRAPHICAL SYMBOLS Petrol is highly inflammable and explosive. Turn This symbol appears in the instruction manual alongside off the motor and let it cool before filling the tank those sections which deal with user safety. with petrol. DO NOT SMOKE. Fill up in a well ventilated place away from any source of flames This symbol appears in the instruction manual alongside or sparks. - Page 6 2• DESCRIPTION OF GRAPHICAL SYMBOLS CONTROLS IDENTIFICATION LABEL A : Drive speed variator control 1- To increase the speed 2- To decrease the speed LABEL B : (PRO51X) Throttle control lever a- START position to start by cold engine b- Engine rate setting range 1- Maximum rate 2- Minimum rate c- STOP position to stop the engine...
-
Page 7: Technical Specifications
3• TECHNICAL SPECIFICATIONS PRO51 X PRO51 D Engine HONDA GXV160 Briggs & Stratton "750 Series" 4 stroke OHV 4 stroke - DOV Piston displacement 163 cm 161 m Stroke 45 mm 50 mm Bore 68 mm 64 mm 2900 min... -
Page 8: Description
4• DESCRIPTION 1. Variator control handle 13. Oil filler gauge / tube 2. Blade clutch control lever 14. Fuel tank cap 3. Throttle control lever 15. Starter handle 4. Blade clutch lever 16. Air filter 5. Drive control lever 17. Fuel cock 6. - Page 9 4• DESCRIPTION PRO 51 D 1. Variator control handle 13. Bumper 2. Blade clutch control lever 14. Strap retaining safety baffle / deflector 3. Throttle control lever 15. Muffler 4. Blade clutch lever 16. Spark plug 5. Drive control lever 17.
-
Page 10: Pictures
5• PICTURES PRO51D PRO51X PRO51X PRO51D PRO51X PRO51D... - Page 11 5• PICTURES MAXI 20°...
- Page 12 5• PICTURES PRO51X PRO51D PRO51X PRO51D...
-
Page 13: Preparation And Getting Started
• Place the mower on a horizontal and unencumbered area. and do not let the engine race. In the event of • Clear the dipstick area of any debris. maladjustment, contact your ETESIA dealership. • Remove the gauge (a pictures 2a and 2b) and slowly pour oil. -
Page 14: Operating Instructions
7• OPERATING INSTRUCTIONS ADJUSTMENT OF CUTTING HEIGHT FORWARD MOVEMENT • To move forwards, pull the advance lever back firmly against the Proceed only after engine has been switched off and blade handlebars (B picture 6). has come to a complete standstill. •... -
Page 15: Regular Maintenance Of Your Lawnmower
Put the blade on Replace the blade as for assembly : blade surfaces facing the several times to dry the braking parts. engine. • Use only ETESIA original blades that are purpose-built for this MAINTENANCE OF THE SAFETY mower. SYSTEM Make sure that the two cutting points turn on the same plane. - Page 16 • Replace the spark plug every 100 hours. is empty. • Use only ETESIA original spark plugs designed for these engines. • As long as the engine is hot, drain the oil through the filler neck. The oil will flow easily than when cold.
-
Page 17: Prolonged Stoppage - Winter Storage
PROLONGED STOPPAGE - WINTER STORAGE 9• • Clean underneath the deck. • Obviously, you can have an approved ETESIA dealer carry out this • Check that the air filter is in good condition and is clean. seasonal maintenance. • Completely empty all petrol from the tank. -
Page 18: Standard Repairs - Problems And Remedies
Most operating problems are due to wrong handling, poor use of the lawnmower or the lack of normal recommended maintenance. The following table describes simple methods of determining a few malfunctions and correcting them. If the problem persists, we recommend that you contact one of our approved ETESIA dealers (list on requist to ETESIA 67165 WISSEMBOURG Cedex - France). -
Page 19: Regular Maintenance Summary Table
11• REGULAR MAINTENANCE SUMMARY TABLE Remove the plug lead before carrying out any work under the cutting deck. BEFORE EVERY AFTER THE FIRST EVERY 50 ITEM PERIODICALLY COMMENTS 5 HOURS HOURS Check level Oil change Oil change * Essential for the warranty Spark plug Clean / adjust the... -
Page 20: Warranty
They need to be sent back on simple request. Should ETESIA and defines the legal warranty period. not receive these parts, warranty claim would automatically be • Should ETESIA discover that the machine is not used in the use cancelled. initially declared, ETESIA allows itself to cancel the warranty. - Page 21 IMPORTANT NOTE : As soon as a machine purchase takes place, the warranty card needs to be: - completed, signed and sent back to ETESIA WARRANTY SERVICE 67165 WISSEMBOURG CEDEX FRANCE - or completed by your dealer on line on the extranet.
- Page 22 Due to their permanent improvement policy, ETESIA reserves the M. Patrick VIVES right to modify specifications. Text and pictures without prior notice. ETESIA SAS - 13, Rue de l’Industrie - F - 67165 WISSEMBOURG CEDEX The President Strasbourg Trade & Commerce Register B343 510 996...
- Page 23 Stamp here please ETESIA SERVICE GARANTIE 13 rue de l'Industrie 67165 WISSEMBOURG CEDEX France...
- Page 24 This card has to be returned completed to ETESIA upon the first setting up. MODELL: SERIAL NUMBER: WARRANTY CERTIFICATE USER NAME ___________________________ Forename _________________________ Street ___________________________ Zip code __________________________ Town __________________________ Country____________________________ Tel ______________________________ Date of purchas _____ _____ 20 ___ Tel.