Table of Contents
Advertisement
Figure 24: Remove the Fan Retention Screws
Step 4: Replace the fan and secure a new fan to the fan
bracket with the 4 previously removed retention screws.
Step 5:
Reinstall the fan bracket into the chassis and
secure it to the chassis with the 2 previously loosened
thumbscrews.
FAN FILTER REPLACEMENT
To replace the fan filter, please follow the steps below:
Step 1: Loosen the 2 fan filter bracket retention screws at
the top of the fan filter bracket and open the bracket.
Figure 25: Remove the Fan Filter
Step 2: Replace the fan filter pad inside.
Step 3: Reinstall the fan filter bracket and secure it to the
chassis with the 2 previously removed retention screws.
CABINET INSTALLATION
Supporting rails, rack trays, or slide rails can be imple-
mented using the mounting holes on the sides of the
chassis. The four mounting holes in the two handles on the
sides of the chassis are used to secure the chassis to the
front rack posts in your rack cabinet to prevent the chassis
from falling forwards.
Figure 26:
Locations of the 4 Mounting Holes
10
Advertisement
Table of Contents
