Advertisement
18
model no. 054-0367-0 | contact us: 1.866.523.5218
CHARGING INDICATOR
This charger is designed to detect some problems that can arise with battery packs.
Indicator lights indicate problems (see table below).
Light
Red on
Red flash
Green on
Green flash
2. TO REMOVE OR INSTALL BATTERY PACK
1) INSTALLING (SEE FIG. F2)
Place the fully charged battery pack into the tool until it clicks into position.
2) REMOVING (SEE FIG. F3)
Depress the battery pack release button firmly first and then lift the battery pack up to
remove from your tool.
F2
ON/ Flash
F3
Status
Defective battery.
Battery Temperature Protection.
The temperature of battery pack is
less than 32
F (0
C) or more than
o
o
104
F (40
C).
o
o
Fully charged.
Charging.
1
2
Advertisement
