Advertisement
model no. 054-0367-0 | contact us: 1.866.523.5218
3. SWITCHING ON AND OFF
To switch on, press the lock off button first, then the on/off switch (see Fig. G).
To switch off, release the on/off switch.
1
G
Groove 1
H1
4. ADJUSTING THE HEAD ANGLE
You can adjust the pole saw head angle (2 positions) according to your needs.
a.
Turn the rotation knob counter-clockwise until it leaves the groove position (see Fig. H1).
b.
Rotate the pole saw head to the desired position (see Fig. H2).
c.
Tighten the rotation knob by turning it clockwise until it locks the pole saw head into the
desired groove position.
WARNING: The battery pack will be too cold to be used if it has
been left in the environment with too low temperature (less than
-4°F (-20°C)) for a long time. The battery pack needs to be warmed
up before use.
2
Groove 2
H2
Position 2
Position 1
19
Advertisement
