Lamp Breakage; Uv Lamp Disposal - VGE MultiMax Pro Installation & User Manual

Uv-c sterilizer
Table of Contents

Advertisement

8.5 Lamp breakage

Also read the chapters 'UV lamp breakage' and 'Quartz tube breakage' where causes and warnings are
described.
If a UV lamp is defective or broken but the quarter tube is not defective, do the following:
1.
Switch off the UV system;
2.
Shut off the power supply to the UV system;
8.5.1.1.1.1
gloves supplied do not protect against cutting). Check the total system for quartz fragments
and take the right measures against this.
3.
Remove the UV lamp (residues) from the irradiation chamber;
4.
Collect any mercury released and dispose of appropriately;
5.
If all remnants have been removed, a new lamp can be placed;
6.
Switch on the UV system and ensure that the irradiation chamber is flowed through with sufficient water
(see chapter 'Cooling the UV system');
7.
Check whether the UV lamp is burning.
In the case of a broken quartz tube, the instructions in the 'Broken quartz tube' section must also be
followed.

8.6 UV Lamp disposal

Used UV lamps must be disposed according the local regulations and laws.
In an effort to provide a safe and efficient way to dispose of VGE Pro UV lamps, used and defective VGE
Pro UV lamps can also be sent to VGE International B.V..
We ensure correct processing under to the following conditions:
- Only VGE Pro UV lamps are accepted;
- The UV lamps that are returned must be packed and returned to VGE International B.V. in the same way
as originally sent to the customer;
- The lamps to be returned must be clearly visible marked with description, number and sender;
- The costs for returning VGE Pro UV lamps are for the sender;
- Any administrative actions with regard to, for example, cross-border transports, must be handled entirely
by the sender;
- UV lamps must be sent to VGE International B.V..
Return address for used and defective VGE Pro UV lamps:
VGE International B.V.
Ekkersrijt 4304
5692DH Son
Netherlands
VGE International B.V.
Ekkersrijt 4304
Warning! Broken quartz is sharp. Use the correct protective equipment. (The
 +31 499 461099
5692 DH Son Netherlands
Installation & User Manual
info@vgebv.nl
www.vgebv.nl
VGEM000-GB192
Pag. 55/68

Advertisement

Table of Contents
loading

This manual is also suitable for:

935mm0400

Table of Contents