Table of Contents
Advertisement
VGEM000-GB192
Pag. 16/68
- Operation: service staff who have received training and instruction from VGE
International B.V. or an authorized service partner;
- Maintenance: Technical staff trained and authorized by VGE International B.V.;
- Electrical work: authorized and qualified electrician.
UV-C radiation can damage the retina of your eyes and unprotected skin. Ensure
that you are not directly or indirectly exposed to UV radiation.
Everyone involved must be informed about the specific hazards associated with a
VGE Pro UV system.
Installation, maintenance and service work must be carried out by VGE International
B.V. trained and authorized persons.
The metal control box and the irradiation chamber must be prohibited at all times
with the protective ground in compliance with local rules and laws.
If, while the UV lamp is switched on, the flow of the irradiation chamber is cut off for
any reason or if the irradiation chamber comes to dry completely or partially, the
irradiation chamber will heat up very quickly, which may result in burning symptoms
when touched. As standard, VGE Pro UV systems with medium pressure UV lamps
are equipped with a temperature-sensitive monitoring switch (bimetallic switch) that
moderately switches off the UC lamp (s) hardware in the event of overheating
(approximately 60 °C).
The maximum irradiation chamber temperature is 60 °C, damage can occur above
this temperature.
Correct operation of a VGE Pro UV system is only guaranteed if original spare parts
and components are used as described in this manual. If the instruction is not
followed, there is a risk of malfunction or damage to the UV system. The use of non-
original spare parts and components will void the warranty on the entire UV system.
Applying modifications, modifications, changes and / or extensions to a VGE Pro
UV-C system is not permitted without written permission from VGE International
B.V., this may have consequences for the operation and safety of the UV-C system.
Ensure that materials that have been replaced or system parts are disposed of and
processed in an environmentally friendly manner in accordance with local and legal
regulations.
●
VGE International B.V.
Ekkersrijt 4304
Installation & User Manual
●
●
+31 499 461099
5692 DH Son Netherlands
●
●
info@vgebv.nl
www.vgebv.nl
Advertisement
Table of Contents
