Table of Contents
Advertisement
Drawing 39
Due to the difference in size in the lamp
contacts (1d and 1e), the lamp only fits
into the socket in one way. Make sure
that the contacts match the openings in
the socket (see also drawing 10).
If the lamp is fully inserted and the ceramic base touches to the O-ring all around (3, drawing 2, 'Lamp
socket assembly' chapter), the lamp be secured via the "bayonet closure". Turn the lamp clockwise until it
stops. There is an embossed arrow on two sides on the edge of the ceramic base. With correct locking, the
arrow corresponds to the closed lock on the socket. (see drawing 12).
VGEM000-GB192
Pag. 44/68
Placement of the UV lamp
Grasp the lamp by the base (1c) and guide it with the spacer
(1j) through the lamp socket (4, drawing 2, chapter 'Lamp
socket assembly') into the quartz tube (11, drawing 2,
chapter 'Lamp socket assembly').
●
VGE International B.V.
Ekkersrijt 4304
Installation & User Manual
Drawing 10
●
●
+31 499 461099
5692 DH Son Netherlands
●
●
info@vgebv.nl
www.vgebv.nl
Advertisement
Table of Contents
