Vtep Access Port - H3C S5560X-EI Series Command Reference Manual

Syntax
ovsdb server tcp ip ip-address port port-number
undo ovsdb server tcp ip ip-address port port-number
Default
The device does not have active OVSDB TCP connections.
Views
System view
Predefined user roles
network-admin
Parameters
ip ip-address
port port-number
the
port-number
Usage guidelines
The device can have a maximum of eight active OVSDB TCP connections.
To establish the connection, you must execute the
disable and then re-enable the OVSDB server if it has been enabled.
Examples
# Set up an active OVSDB TCP connection to port 6632 at 192.168.12.2.
<Sysname> system-view
[Sysname] ovsdb server tcp ip 192.168.12.2 port 6632
Related commands
ovsdb server enable
ovsdb server ptcp

vtep access port

Use
vtep access port
Use
undo vtep access port
Syntax
vtep access port
undo vtep access port
Default
An interface is not a VTEP access port.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
: Specifies the destination IP address for the TCP connection.
: Specifies the destination port for the TCP connection. The value range for
argument is 1 to 65535.
to specify a site-facing interface as a VTEP access port.
to restore the default.
ovsdb server enable
50
command. You must