Table of Contents
Advertisement
Section 5 - Attachments
Fork Mounted Hook (Before S/N 0160037689)
Use Appropriate Carriage Attachment Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/Fork Capacity" on
page 5-3.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt lever (2) controls the fork mounted hook tilt.
• Move lever back to tilt up.
• Move lever forward to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-11.
• Secure the fork mounted hook to the forks by sliding the fork mounted hook onto
the parent forks and install the retaining pin behind the vertical shank of the fork.
5-30
Description
Fork Mounted Hook ...................................................... 90553036
Fork Mounted Hook ...................................................... 91565094
1
P/N
2
31200172
Advertisement
Table of Contents
